Installing the Lock onto the Gate
For Double Gates: Fit the horizontal lock on the leading edge of the
leaf that will be opening first and closing second. Fit the striker plate
onto the gate that opens second and closes first.
For Single Gates: Fit the horizontal lock on the leading edge of the
gate and fir the striker plate onto the post or pillar that the gate is
closing up to.
The lock arrangement is defaulted for left hand gates
.
For right handed gates, the lock will need to be rotated inside its
cradle.
Step 1 – Remove rubber cable grommet from
bottom of cradle - C.
Step 2 – Remove end cap – A
Step 3 – slide lock mechanism out of cradle,
leaving it on its own – B
Step 4 – rotate Lock mechanism 180 degrees - B1