protech SP-7145, User Manual

Page: 177 / 178

Appendix B Technical Summary
SP-7145/7147 SERIES USER MANUAL Page: B-18
III. BIOS Update Procedure
1
Use the bootable USB storage to boot up the system into the
DOS command prompt.
2
Type " AFUDOS 714Xxxxx.bin/p/b/n/x ” and press
Enter
to
start the flash procedure.
(Note that xxxx means the BIOS revision part, e.g. 0PI1…)
3
During the BIOS update procedure, you will see the BIOS
update process status and its percentage. Beware! Do not turn
off the system power or reset your computer when the entire
update procedure are not complete; otherwise, the BIOS ROM
may be crashed and the system will be unable to boot up next
time.
4
After the BIOS update procedure is completed, the following
messages will be shown:
5
Restart the system and boot up with the new BIOS
configurations.
6
The BIOS Update is completed after the system is restarted.