protech Prox-1510 M1, User Manual, Page: 26 / 89

Chapter 2 Hardware Configuration
Prox-1510 USER
’
S MANUAL
Page: 2-15
2-17. PANEL POWER CONNECTOR
J5 : Panel Power Connector
The pin assignments is as follows:
PIN ASSIGNMENT
1 +12V SAFE
2 GND
3
VDD SAFE (+5V/3.3V)
Note: Before using this connector, make sure that you set the JP5 jumper at
the same time. Pin #3 can be +5V or +3.3V depending on the jumper
set on “Panel VCC Selection”.
2-18. PANEL VCC SELECTION
JP5 : Panel VCC Selection
The pin assignments is as follows:
VCC SELECTION
JUMPER SETTING
(pin closed)
JUMPER
ILLUSTRATION
VCC +5V
1-2
JP5
1
VCC +3.3V
2-3
JP5
1
J5
1