Chapter 4 Award BIOS Setup
PPC-7368 USER
′
S MANUAL
Page: 4-17
ONBOARD SERIAL PORT 1:
ONBOARD SERIAL PORT 2:
ONBOARD SERIAL PORT 3:
ONBOARD SERIAL PORT4:
Select an address and corresponding interrupt for the first and second serial
ports.
ONBOARD PARALLEL PORT:
This item allows you to determine access onboard parallel port controller with
which I/O address.
PARALLEL PORT MODE:
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible,
or
SPP
unless you are certain your hardware and
software both support one of the other available modes.
ECP MODE USE DMA:
Select a DMA channel for the parallel port for use during ECP mode.
PARALLEL PORT EPP MODE:
Select EPP port type 1.7 or 1.9.
IO CHANNELCHECK NMI :
This field allows you to enable or disable IO channel check NMI. Before
selecting this function, the user should check first that NMI function is enabled as
described in chapter 2 (
Reset/NMI/Clear Watchdog Selection
).
Summary of Contents for PPC-7368
Page 1: ...USER S MANUAL PPC 7368 VIA Eden Low Power 8 4 Panel PC System PPC 7368 M1...
Page 9: ...Chapter 1 Introduction PPC 7368 USER S MANUAL Page 1 3 1 2 CASE ILLUSTRATION...
Page 93: ...Appendix A System Assembly Page A 6 PPC 7368 USER S MANUAL EXPLODED DIAGRAM FOR FRONT PANEL...
Page 97: ...Appendix B Technical Summary Page B 2 PPC 7368 USER S MANUAL BLOCK DIAGRAM...
