manualshive.com logo in svg

protech PCI-531LF, Operation Manual, Page: 10 / 84

Share
Download
protech PCI-531LF Operation Manual Download Page 10

 

Chapter  1  Introduction 

 

 

 

Page: 1-4 

PCI-531LF USER

′

S MANUAL

 

 

 

z

 IDE INTERFACE : 

One IDE ports support up to two IDE devices. 
Supports Ultra DMA 33. 
 

z

 SERIAL ATA PORT : 

Two S-ATA connectors from ICH7R. 
 

z

 FLOPPY DISK DRIVER INTERFACE : 

Supports up to two Floppy Disk Driver, 3.5” and 5.25”. 
 

z

 USB CONNECTOR : 

Support up to four USB 2.0 ports. 
 

z

 LAN ADAPTER : 

G1A Version: LAN1/2: Marvell 88E8052 10/100/1000 Mbps Ethernet 
G2A Version: LAN1/2: Marvell 88E8071 10/100/1000 Mbps Ethernet 
Support wake-on-LAN function. 
 

z

 SERIAL PORT : 

Two high speed 16550 Compatible UARTs with Send / Receive 16 Byte 
FIFOs; COM1:RS-232; COM2: RS-232/422/485 
MIDI Compatible 
Programmable Baud Rate Generator 
 

z

 SOUND : 

Realtek ALC655 (AC’97 Codec). 
Fully Compliant AC’97 Analog I/O Component 
16-Bit Stereo Full-Duplex Codec 
Four Analog Line-level Stereo Inputs for Connection. 
High Quality CD Input with Ground Sense 
Stereo Line-Level Output 
Interface: Line-In, Line-Out, Microphone, and CD Audio-In. 

Summary of Contents for PCI-531LF





















































































Reviews:

No comments