protech PA-6225, User Manual

Page: 23 / 283

Chapter 1 Introduction
PA-6225 SERIES USER MANUAL Page 16
1-4. SAFETY PRECAUTIONS
The following messages are safety reminders on how to protect your systems from
damages, and extend the life cycle of the system.
1. Check the Line Voltage
(1) The operating voltage for the power supply should be within the range of
100V to 240V AC; otherwise the system may be damaged.
2. Environmental Conditions
(1) Place your PA-6225 on a sturdy, level surface. Be sure to allow enough
space around the system to have easy access needs.
(2) Avoid installing your PA-6225 Series POS system in extremely hot or cold
places.
(3) Avoid exposure to sunlight for a long period of time (for example, in a
closed car in summer time. Also avoid the system from any heating device.).
Or do not use the PA-6225 when it has been left outdoors in a cold winter
day.
(4) Bear in mind that the operating ambient temperature is between 0

C and
35

C (32

F and 95

F).
(5) Avoid moving the system rapidly from a hot place to a cold place, and vice
versa, because condensation may occur inside the system.
(6) Protect your PA-6225 against strong vibrations, which may cause hard disk
failure.
(7) Do not place the system too close to any radio-active device. Radio-active
device may cause signal interference.
(8) Always shutdown the operation system before turning off the power.
3. Handling
(1) Avoid placing heavy objects on the top of the system.
(2) Do not turn the system upside down. This may cause the hard drive to
malfunction.
(3) Do not allow any objects to fall into this product.
(4) If water or other liquid spills into the product, unplug the power cord
immediately.