protech PA-3211, User Manual

Page: 80 / 172

Chapter 4 Software Utilities
PA-3211 SERIES USER MANUAL Page: 4-11
DLE DC4 n m t
[Name] Real-time output of specified pulse.
[Format]
ASCII DLE DC4 n m t
Hex. 10 14 n m t
Decimal 16 20 n m t
[Range]
n = 1
m = 0,1
1
≤ t ≤ 8
[Description]
This outputs a signal specified by t to the connector pin specified by m.
m = 0: #2 Pin of the drawer kick connector
m = 1: #5 Pin of the drawer kick connector
On time is set to t x 100 msec; Off time is set to t x 100 msec.
ESC FF
[Name] Print data in page mode.
[Format]
ASCII ESC FF
Hex. 1B 0C
Decimal 27 12
[Range] N/A
[Description]
Prints all buffered data in the print area collectively in page mode.

This command is enabled only in page mode.

Holds the following information after printing.
a. Expanded data
b. Character print direction selection in page mode (ESC T)
c. Set print region (ESC W) in the page mode.
d. Character expansion position
ESC SP n
[Name] Set right-side character spacing.
[Format]
ASCII ESC SP n
Hex. 1B 20 n
Decimal 27 32 n
[Range]
0 ≤ n ≤ 255
Initial Value n = 0
[Description]
This command sets the size of space to right of character.
Right space = n × [horizontal motion units].