Chapter 2 Hardware Configuration
BM-0947 USER
′
S MANUAL
Page: 2-16
2-16. CLEAR CMOS DATA SELECTION
JP4:
Clear CMOS Data Selection
SELECTION
JUMPER SETTINGS
JUMPER ILLUSTRATION
Normal
Open
1
JP4
Clear CMOS*
Close
1
JP4
Note:
Manufacturing Default is Normal.
*To clear CMOS data, user must power-off the computer and set the jumper to “Clear
CMOS” as illustrated above. After five to six seconds, set the jumper back to
“Normal” and power-on the computer.
2-17. BIOS RECOVERY MODE SELECTION
JP1:
BIOS Recovery Mode Selection
SELECTION
JUMPER SETTINGS
JUMPER ILLUSTRATION
Recovery
Open
1
JP1
Normal
Close
1
JP1
Note:
Manufacturing Default is Normal.