７
to start the motor and make the wheel rotate. During the rotating measurement, in
case of emergency you can open the guard or press to stop rotating. See
figures 13
、
14.
When the wheel stops rotating, the screen displays the inside and outside unbalance
values, with the inside on the left and the outside on the right. Press to
convert the unit g/oz .
Rotate the wheel with hands and stop rotating when the red triangle cursor on the
right moves to the middle of the rule. Place a counterweight of 34g on the 12 O’clock
position outside the wheel; Keep rotating the wheel and stop rotating when the red
triangle cursor on the left moves to the middle of the rule. Place a counterweight of
22g on the 12 o’clock position inside the wheel. See figures 15
、
16.
Dynamic measurement finished.
7.5 Static Mode
After dynamic mode measurement, select static mode directly. The balancer will
automatically calculate the result of static mode. To start again static mode , you
have to install the wheel and input parameters first. In the interface of figure 13 press
Figure 13
Figure 14
Figure 15
Figure 16
WB-514 Wheel Balancer user’s manual
