31
MARK76R0001 Rev 3
After the tanning session
Cleaning
All parts of the equipmnent that come in contact with the user must be cleaned and
disinfected after each session. Cleaning is part of basic care that can be performed by
qualified staff or service personnel.
Infections can be transferred through skin contact. The following items should be cleaned
after each session:
• Goggles
• base plate
• acrylics
• handles
• control panel
• Mp3 components
• Only approved tanning bed cleaner should be used, such as Lucasol One step. Use of any
incorrect tanning bed cleaner will void the warranty. Use only EPA registered quaternary
ammonium germicidal based detergent solution. Always follow the product label for dilution
instructions.
Cleaning Acrylics:
Do Not clean or rub with a dry cloth as it may cause scratches!
Non-approved cleaning agents should not be used, especially products including lysoform,
ethyl alcohol or other liquids containing alcohol.
If used the warranty will be voided!
ProSun® recommends the use of Lucasol One Step when cleaning acrylic sheets. Acrylics
in tanning equipment are extremely porous and should not be cleaned/disinfected with non-
approved products.
Acrylics should be cleaned after every use, even though they do not always come in direct
contact with the user. If the user does touch the acrylic and those marks are left for a period
of time, combined with the heat and light fromt he tanning lamps those marks can become
permanent.
To clean the acrylics you should follow the instructions on the bottle. Never spray the solution
directly onto the acrylic. Always spray a cloth and apply the cleaner, then use a clean dry cloth
to make sure the acrylic is fully dried before the next session.
