40
MARK76O0003 Rev 3
A B C D E F
NOTE: Start with a blank display.
1
To enter program mode:
Push B and D simultaneously for 10 seconds.
Display starts blinking 01 20
2 To put in remote:
Push button C and bring time down to 00 push button A to enter.
3 To set parameters:
Push B and D simultaneously for 10 seconds.
Display starts blinking 01 20
4 Push F to scroll to parameters 01 20 Session time in minutes
adjustable in increments of 1 minutes.
10 20 Max time in minutes
adjustable in increments of 1 minutes.
11 00 Cool down facial time
adjustable in increments of 30 seconds.
12 6 Cool down time
adjustable in increments of 30 seconds.
17 1 Quick start for remote.
18 1 Edit start time.
22 1 sound on 0 sound off.
90 0 Manufacturer settings do not change.
5 If scrolled to the right parameter change it with the C or D buttons.
6 If satisfied push A for enter.
To Program your Onyx display
Service Mode
When the unit is in standby mode, you can enter into the service or maintenance
parameters.
