manualshive.com logo in svg

Prostat PRF-912B, User Manual, Page: 14 / 20

Share
Download
Prostat PRF-912B User Manual Download Page 14

14

Rev. A  / November 2005

PRF-912B Miniature Concentric Ring Fixture Set

PRF-912B & PRV-913B Miniature Concentric Ring Fixture Set Specifications

PRF-912B Miniature Concentric Ring

Physical Dimensions:  Length: 5.9 inches (150mm) without probe cover. 6.5 inches (165mm) with probe  

 

 

 

cover. Probe diameter 0.5 inches (12.7mm).  Probe cover outer diameter 0.63    

 

 

 

inches (16mm).

Probe Weight:  

1.5 ounces (43 grams)

Finish:   

 

Black anodized

Dielectric Material:   Teflon

Contact Dimensions:  Inner (Center) Contact Probe: 0.1 inches (2.54mm)

 

 

 

Outer Contact Probes: Ten each 0.06 inches (1.59mm) diameter at 0.258 inches    

 

 

 

(6.56mm) bolt circle.

Minimum Sample 

0.32 inches (8.2mm) diameter

Size: 

Probe Spring   

3.5 pounds (1.6 kg)

Force/Test:

 

Probe Total Travel: 

0.3 inches (7.8mm)

Connection:   

BNC with outer source and inner sense connections

Cable:   

 

RG-174 coaxial cable equipped with insulated BNC couplers, and BNC/Banana    

 

 

 

adapter for connection to Prostat PRS-801 Resistance System.

Power:  

 

Not applicable. Fixture powered by resistance instrument.

Warranty: 

 

Prostat Corporation, Limited one year

PRV-913B Dual Verification Fixture

Physical Dimensions:  2.0 in x 2.0 in x 0.83 in (50.1mm x 50.1mm x 21mm)

Fixture Weight: 

5.29 ounces (150 grams)

Finish:   

 

Black anodized

Contact Pads:   

Copper substrate with nickel and hard gold plating

Resistors: 

 

±2% precision, 10-megohm resistors, total of 10 (Concentric Ring Side)

 

 

 

±2% precision, 1 each 10-megohm resistor (2-Point Side)

Power:  

 

Not applicable. Powered by PRF-912B during test

Warranty: 

 

Prostat Corporation, Limited one year

Summary of Contents for PRF-912B





















Reviews:

No comments