Prostat PFA-860, User Manual, Page: 6 / 12

b. Plug the second test lead into the banana recep-
tacle on the Hand Held Wand.
c. While the Human Test Subject is wearing the shoes
in ques on, the subject stands on the hinged test
plate with one foot on each side of the hinge while
holding the Hand Wand fi rmly in one hand.
d. Press TEST bu on on the meter, and read the
resistance.
e. Repeat at 100V if desired or necessary.
3. A er the Shoe resistance is recorded, turn the meter OFF.
C. Resistance of One (1) Shoe through Test Subject
1. Place the resistance meter on a table top or other stable surface and a ach the leads as de-
scribed in the Opera ons Manual.
2. Set the voltage to 10V Se ng.
a. A ach the Banana Snap Accessory to the right snap on the Hinged Test Plate and plug one
lead into the banana lug assembly.
b. Plug the second test lead into the banana receptacle on Wand.
c. While the Human Test Subject is wearing the shoes in ques on, the subject stands on the
hinged test plate while fi rmly holding the Hand Wand in one hand.
d. With the Test Subject li ing the Le foot from the test plate, Press TEST bu on, read the
Right shoe resistance from the display.
e. Repeat at 100V if desired or necessary.
3. A er the Right Shoe resistance is recorded, repeat the en re procedure with the snap on the
Le side of the hinged test plate and raising the Right foot.
A er the Le Shoe resistance is recorded, turn the meter OFF .
V. Tes ng Footwear Resistance through Shoe to Test Plate
A. Resistance of Shoe to Hinged Test Plate
1. Place the resistance meter on a table top or other
stable surface and a ach the leads as described in the
Opera ons Manual.
2. Set the volatge to 10V Se ng.
a. A ach the Banana Snap Accessory to the right
snap on the Hinged Test Plate and plug one lead
into the banana.
6
Rev. C / October 2011
PFA-860 Footwear Auditor