12
NOTE
Initial mounting of the CPM-720B Charge Plate Assembly to the PFM-711B Field Meter case may
be extremely snug. Be sure that the plate and meter case grooves are perfectly matched before
mating the two instruments together. Subsequent uses will cause sufficient wear for easy
mounting.
6.
Carefully slide the plate towards the meter’s sensor until the plate assembly is fully mounted
to the PFM-711B (Figure 5).
a.
The PFM-711B meter case should be mounted snugly into the lower grounding plate
notch.
b.
The Teflon wedge located beneath the upper plate isolates the upper plate from the
PFM-711B meter case
3.
Before operating the PFM-711B and CPM-720B, the operator should select and wear a wrist
strap that is fully functional and properly grounded.
Figure 4. Sliding the CPM-720B onto the PFM-711B
