P4
TROUBLE-
SHOOTING
This page summarizes the most common problems you could encounter with
the product. If you are unable to solve the problem with the information below,
please contact prosperacorp.com
Problem
The product does
not work
The product is
abnormally warm
Noise can be heard
from the product
Possible Cause
The product is not plugged
in properly.
The product has just
session and has
automatically switched to
standby mode.
You may have used the
product continuously for 30
minutes or more where the
over heat protection has
been activated.
An excessive load has
been applied on the
product.
The product is likely to be
overused.
Noise is made by the
mechanical parts of the
product.
Suggestion
Ensure the voltage on the
product corresponds to the
local mains voltage and
then plug in again.
If you want another
session, press the MODE
button again.
Unplug the product and let
it cool down for 60 minutes
before you use it again.
Reduce the excessive load
and start again.
Unplug the product and let
it cool down before using
it again.
This is normal and does
not mean that the product
is faulty.
