26
Surround Mode 2
When MPEG signals are input and IN-AUTO is selected,
the surround mode is set to MPEG automatically. The DSP
button doesn’t work.
When the source is PCM (2-channel stereo) and IN-AUTO
or IN-PCM is selected, or when analog stereo signals are
input, you can select one of the following surround modes:
DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx
MUSIC, DOLBY PRO LOGIC, VIRTUAL NARROW,
VIRTUAL WIDE, DTS NEO:6 CINEMA, DTS NEO:6
MUSIC, THEATER, HALL, STADIUM
• When the DSP button is pressed once, the current surround
mode is displayed. Press the DSP button repeatedly to
select any other surround mode.
• When you press the DSP button, the sound is cut off for a
moment.
• When the surround back speaker is set to “None”, Dolby
Pro Logic II appears instead of Dolby Pro Logic IIx.
• DOLBY DIGITAL or DOLBY DIGITAL EX can be selected
only during playback of a DVD disc recorded in DOLBY
DIGITAL format.
• The DSP indicator lights when THEATER, HALL or
STADIUM is selected.
(DSP: Digital Signal Processor)
D
C
STEREO
Press the STEREO button to select the stereo mode.
“STEREO” is scrolled, and sound is output from front
speakers (and the sub-woofer if connected).
To cancel the stereo mode, select any other surround mode
by pressing the DSP button.
• If you select the stereo mode while the digital signal of
DOLBY DIGITAL or DTS are being input, the multi-channel
sound is downmixed to 2-channel.
• If the SPEAKER button is set to off while the digital signal of
DOLBY DIGITAL or DTS are being input, the multi-channel
sound is downmixed to 2-channel automatically. And when
the SPEAKER button is set to on, it will return to the
previous surround mode.
