ILX56-PBS
Diagnostics
ControlLogix® Platform
User Manual
Page 55 of 87
Slave Status
The Slave mode diagnostics tab displays the following parameters:
Figure 5.5
– ILX56-PBS Status monitoring – Slave Status
Parameter
Description
BAUD Rate
Current BAUD rate of the PROFIBUS Network
Auto-BAUD
If the BAUD rate for the PROFIBUS Network will be automatically detected
CLEAR Op-Mode
If the operational state of the PROFIBUS Network is CLEAR
Comms State
OK
All configured slaves are operating correctly.
Failure
At least one of the configured devices are not operating correctly.
Slave Count
Number of slaves configured
Last Response Time
The time it took (in microseconds) to respond to the last request from a DP
Master.
Max Response Time
The maximum time it took (in microseconds) to respond to a request from a
DP Master.
Min Response Time
The minimum time it took (in microseconds) to respond to a request from a DP
Master.
Table 5.4 - Parameters displayed in the Status Monitoring
– Slave Status Tab
