Installing the PC56 Embedded PC
PC56-HIST-xxxxLX ♦ ControlLogix Platform
Setup Guide
In-Rack PC with Data Historian
Page 8 of 29
ProSoft Technology, Inc.
December 6, 2010
1.1
Package Contents
Your new PC56 Embedded PC is shipped with the following:
PC56 Embedded PC
RJ45 to DB-9 Cable
DB-9 Female to 5 Pos Screw Terminal
Adapter
All modules fit into standard slots on the ControlLogix backplane. The PC56
Historian and its IDE module will each take a slot on the ControlLogix backplane.
You will need two available side-by-side slots on the backplane.
To install the PC56 Historian module:
1
Check jumper configurations (page 17, page 11, page 12, page 11) on each
module
2
Insert module in the ControlLogix rack (page 9)
3
Connect your Peripherals (page 19)
4
Verify Boot Up (page 20)
