Start Here
MVI46-PDPS
♦
SLC Platform
Profibus DP Slave Communication Module
ProSoft Technology, Inc.
Page 13 of 72
April 30, 2008
Warning: This module is not hot-swappable! Always remove power from the rack before
inserting or removing this module, or damage may result to the module, the processor, or other
connected devices.
1
Turn power OFF.
2
Align the module with the top and bottom guides, and slide it into the rack
until the module is firmly against the backplane connector.
3
With a firm but steady push, snap the module into place.
4
Check that the holding clips on the top and bottom of the module are securely
in the locking holes of the rack.
5
Make a note of the slot location. You will need to identify the slot in which the
module is installed in order for the sample program to work correctly. Slot
numbers are identified on the green circuit board (backplane) of the SLC
rack.
6
Turn power ON.
Note: If you insert the module improperly, the system may stop working, or may behave
unpredictably.
