Pro'sKit SS-820B, User Manual

Page: 6 / 28

Shooting Clubs
To reuse brass cartridges: Adding special acid-based solution
can make fired brass useable and like new again.
Gun cleaning and care: Cleaning guns after shooting is time
consuming. Adding special solution in the water and using
ultrasonic cleaners can complete the cleaning better, quicker
and easier than traditional methods.
Mobile Phone and Electronics Service Shops
PCB renewal: Non-operational electronics, after falling into
water, or non-operational key pads can be cleaned with
ultrasonic cleaners and pure alcohol to recover the functions.
Watch Service Shops
Precision parts cleaning: Put small parts in a beaker made of
stainless steel or glass filled with lubricant oil, then place the
beaker inside the cleaning tank and add water. Ultrasonic
waves will penetrate the beaker and act on the parts to make
them clean
Printing Shops
Unblocking dried printer heads or ink cartridges:
Large printers and inkjet printers often have dried printer
heads or ink cartridges ports. Replacing them with new ones
is very costly. Adding acetone or special cleaning solution and
using an ultrasonic cleaner with a couple of minutes of
cleaning will remove the blockage and make them usable again.
Avoid acetone from contacting the plastic housing to prevent
corrosion. Use Indirect Cleaning explained later and a glass or
metal container for acetone.
Automotive Shops
To clean precision parts: Add 50 ml (3 tablespoons) of
dishwashing liquid in the water, turn the heater on to clean
precision parts such as valves, injectors, gears and bearings.
Ultrasonic cleaners clean debris in tiny holes and crevices
effectively, saving time and effort compared to traditional
soaking and brushing methods.
4