OPERATING INSTRUCTIONS
1. Attaching and removing accessories
alling
Inst
Installing the accessory (bit):
Insert the accessory shank to
the chuck.
Remove the accessory (bit):
Remove the accessory from
the chuck.
Remove
**Do not shake the tool or press
the trigger when installing or
remove the accessory.
**To avoid the tool damages, do not keep fastening or loosing the screw over
3 seconds when the tool is out of power or block.
** When the motor is stopped, please stop operation to avoid any damage.
**Do not recommend to use drill.
2. Switch (Forward / Reverse) & LED light
The switch features
Forward/Reverse function.
The LED will be light when
pressing the switch.
** Do not force the tool when
the tool is rotating
.
Forward (R)
Reverse (L)
8
