5X Soft Tube Magnifier Workbench Lamp
MA-1225
1. Specification:
1) Lens material: glass
∮
127mm
( 5”)
2) Diopter: 5 diopter
3) Light source: 110V-120V/220V-240V AC, T5 22W energy saving compact fluorescent Lamp
4) Supplied with electronic ballast
5) Standard mount: table bracket
2. HOW TO USE
1) Securely fasten the table clamp included to a solid horizontal surface with thicknesses between 12.5 -
62.5mm (0.5 - 2.5"). Ideal for household tables, study desks and work benches
2) Insert the stem of the lamp into the clamp hole
3) Insert the plug into a conveniently located electrical socket
4) Switch the lamp on by using the on/off switch located on top of the head. The lamp is now ready to use.
5) Adjust your lamp head position to suit your need and tighten the locking nuts as required
3. CHANGING THE TUBE
1) Switch the lamp off and take the plug out of the electrical socket
2) Take the transparent tube protector cover off
3) Allow the tube to cool off and then remove carefully by unplugging
4) Replace with new tube and reposition the tube protector cover
4. IMPORTANT! - SAFETY INSTRUCTIONS
WARNING:
When using electrical products, important safety precautions must be adhered to in order to reduce
the risk of fire, electric shock and personal injury.
5. PLEASE READ THE FOLLOWING CAREFULLY:
1) Indoor use only:
《
1
》
Room temperature from -20 to +40 degrees centigrade;
《
2
》
Humidity: Less than
or equal to 95%
2) Do not expose the lamp to:
《
1
》
High temperatures;
《
2
》
Water, steam or damp conditions;
《
3
》
Corrosive,
flammable liquids, or gaseous / explosive atmospheres
3) Do not abuse the cord. Never carry the lamp by the cord or pull the cord to disconnect the lamp. Keep the
cord away from heat, oil or sharp objects
4) Disconnect your lamp when not in use and when changing tubes
5) Never attempt to disassemble or repair the lamp, unless you are a qualified electrician
6) CAUTION: Never leave the magnifier lens unattended in direct sunlight or where light can shine through
it - This constitutes a fire hazard!
5X
放大鏡燈
MA-1225
1.
規 格
1)
鏡片材料
:
玻璃∮
127mm (5”)
2)
倍率
: X 5
倍
3)
光源
: 110V-120V / 220V-240V AC T5 22W
環型燈管
4)
採用電子式啟動器
5)
標準底座
:
夾桌式
2.
如 何 使 用
1)
將放大鏡燈安全地拴緊於水平桌面上，其厚度介於
12.5-62.5mm
中的家用桌、學習書桌與工作
椅上。
2)
將燈管放入螺絲洞中。
3)
將插頭插入電源插座。
4)
打開底座上方的
ON/OFF
開關，將燈頭移至有需要的位置。
5)
調整燈頭位置去適合你所需要的地方並拴緊固定。
3.
替 換 燈 管
1)
在更換燈管之前。將開關關閉，並將插頭拔除插座。
2)
除去透明軟性保護管層。
3)
讓燈管冷卻，並小心地拔開插頭。
4)
替換新的燈管並蓋上保護層。
4.
重 要 安 全 指 示
警 告
:
當在使用電的產品時重要的安全預防一定要遵守，為了要減少火災的危險、電擊、與個人傷
害，請仔細地閱讀下列各項指示：
1)
僅能室內使用
:
《
1
》室內攝氏溫度從
-20 to +40
；
《
2
》溼度
:
小於或等於
95%
2)
不要將放大鏡燈暴露於
:
《
1
》高溫
；
《
2
》水、蒸氣、或濕氣的狀況
；
《
3
》腐蝕物、易燃氣體與
液體或炸藥
3 )
不要去任意扭動電線，絕對不要將電線與頭燈做分離動作，要使電線遠離熱
、油或尖銳的物
體。
4)
當你不使用的時候，請切斷電源。
5)
除非你是一位合格的維修工程師，否則不要任意拆解放大鏡燈。
5.
當 心
:
絕對不要將鏡片至於日光或其他光源能穿透的地方，會導致火災的發生。
