ProsKit FB-1688, User Manual

Page: 10 / 40

10
CAUTION

Do not rotate the blade with hands.

Do not rotate the blade with metallic tweezers. Doing so
may damage the blade.
3. Tighten the blade set screw.
4. Try and cleave the fiber. Make visual check of the fiber end
face with splicer. If the fiber end face is poor, adjust the blade
height. (Refer to “blade height adjustment)
BLADE HEIGHT ADJUSTMENT
1. Loosen 2 hex screws
(
circle mark) with the attached hex. key
2. Turning the blade height adjustment slot screw
(
circle mark)
3. Tighten 2 hex screws
(
circle mark) with the attached hex key.