2
second, then will be silent for about 4 seconds then give three mid-tone beeps. After another 4 seconds it should
register a final single mid-tone beep. At this point you should be able to find the device with your smart phone or
laptop in your list of available Wifi connections with the identifier
“
PROSENSORS AP 12:34:56:78:9A:BC
”
where
the last 12 digits represent its unique MAC address and will be different for each BIOT.
Choose to connect to the PROSENSORS AP in your list of wifi options, and when asked for the password type in
the 10 digit BIOT WiFi password you copied on paper which is now hidden under the batteries in the battery
chamber. Depending on your phone or laptop it can take up to 90 seconds to connect to the BIOT to be able to
enter the password (IPhones are the slowest to gain access for example, whereas Androids are faster).
Once you are connected to the BIOT as an access point, you will want to go to the webpage 192.168.4.2. Just go to
your web browser and in the address bar type in 192.168.4.2 and hit enter. This will bring up a terms-of-use legal
disclaimer screen in your web browser that ends as follows:
Read the terms-of-use and, IF you agree, then accept them. The terms are repeated later in this user manual.
Accepting the terms would lead you to the welcome page as follows:
