Maintenance Instruction
7
Maintenance
In a case when the water is hard which means water contains too much calcium and
magnesium, it can cause a “white powder” problem and leave heavy scales on the
surface of water basin, transducer and inner surface of the water tank. Scales on
the surface of transducer will let the unit work improperly.
TECHNICAL DATA
• Model: 807C
• Heating power: 80W
• Humidify power: 30W
• Noise level: ≤38dB(A)
• Total power: 110W
• Water tank capacity: 5.3L(1.4gal)
• Evaporation Rate: ≥350mL/h
• Power supply: (
JP:
110V-120V 60Hz)
(
US:
120V 60Hz) (
EU:
230V 50Hz)
We recommend
1. Use cold boiled water or distilled water.
2. Clean the transducer, water tank and basin unit every week.
3. Change the water in water tank more often to keep it fresh.
4. Make sure to pull out the water from the water tank and dry the water basin
before you store the unit unused for a long period of time.
5. Clean the whole unit and make sure that all parts of the unit are dried completely
before unused for longer period of time.
How to clean the transducer
1. Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for
2-5 minutes.
2. Brush off the scale from the surface.
3. Rinse the transducer with clean water.
How to clean the basin unit
1. Clean the water basin with soft cloth and the cleaning abluent if there is scale in it.
2. If the scale is covered on the security switch, drop the cleaning abluent on the
scale and clean it out with the brush.
3. Rinse the water basin with clean water.
