background image

6

POWER SOURCE

Inert the AC plug into a conveniently located AC outlet having AC 120V~60Hz.
WARNING: This unit has a long AC cord that can easily be tripped on or pulled 

on, causing injury. Please make sure it is arranged so it will not drape over a 

tabletop, etc. where it can be pulled on by children or tripped over accidentally.

GENERAL OPERATION

2. Press       button to turn on or turn off the unit.

3. Press the 

MODE

 button repeatedly to select the playback source. The source 

Note: If no USB device or CARD was inserted, USB or CARD mode cannot 

be selected by MODE button. 
4. Press the 

VOL(/- Buttons

 to adjust volume level.

5. Press the 

EQ

 button to set EQ (equalizers) mode as desired.

6 Press the       Button on the remote control to turn off the sound. Press it again 

to turn it back.

7. If the unit is not used for a long period of time, pull out the plug to turn off the 

unit completely.

PLAY RADIO

Press the      button to turn on the unit.

1.  Press 

 button repeatedly until the FM Indicator turns green.

stations then stored into the memory automatically. 

3.  After 

finished

  FM  SCAN,  press  numeric  buttons  then  wait  for  approx  3 

seconds, you can select 1-20 preset stations. eg: pressing “1”, means preset 

station 1. pressing “2” + “0” means preset station 20. Or press       to cycle through

To enhance radio reception ability:

FM: Fully unwind the antenna wire. Extend the antenna wire and place it in the 

1. Move                                             on the rear of the unit to ON position.

POWER ON/OFF SWITCH 

 indicator will light green accordingly.

MODE

and listen to the preset stations.

all available  

2. Press the FM SCAN button or press and hold       button and then the unit will start 

to search 

LISTENING TO AUXILIARY SOURCE

1. Connect your auxiliary source (e.g. iPod / iPad / MP3 player) to the AUX jack.
2. Press      button to turn on the unit.Press the 

 Button repeatedly until 

the AUX indicator turns green.

3. Start playback from your auxiliary source.

4. Adjust the volume to desired level.

5. To stop playback, disconnect your auxiliary source from the AUX jack.

MODE

USB charger for iPhone/iPod/iPad

There is a USB charger on the top of the unit to charge iPhone/iPod/iPad.

Note:

This USB charger is for iPod/iPhone/iPad ONLY.

Summary of Contents for PSP288-PL










Reviews: