Copyright 2010 Arfaian Export Import HGmbH, All rights reserved
６
Operating instructions
Unpacking and assembly
1. Carefully unpack the machine and the accessories, lift them out of
the carton and check for any obvious damage. Check that all parts
are included. Please keep the original packaging.
2. Align the cylinder pipe feet link plank with the X type feet and fix
them together by tightening the screws
3. Adjust X Type feet mats to level the machine. Put the butterfly
form cover over the top of the cylinder pipe to cover the X Type
feet. Note- you have to unscrew and remove the Stringing
Machine Host link plank first.
4. Fix the Stringing Machine Host link plate back on top of the
cylinder pipe. Fix well.
Now fix the clip racket body to the main machine part.
Align the machine with the Stringing Machine host head. Tighten
the screws.
Note: To tighten the screws of the racket stringing machine at the steel
parts, you must lock them firmly when installing.
Pounds set and operation
A
：
Pounds set
1. Select the correct power supply (220V-50Hz) and plug in.
2. In Standby mode, the required pounds can be set with the
adjustment button on the machine host (LED display).
3. To increase the pounds rotate the pounds adjustment button
clockwise (LED display). To decrease the pounds rotate the pounds
adjustment button counterclockwise (LED display).
B
：
Changing from LB to KG
1. When the machine is switched on the LB indicator light comes on.
The default u
nit of measure when the machine is turned on is “LB”
(LED display).
