background image

Page 3 

Safety precautions 

 

Following are fatal informations for your safety, please observe strictly. 

“ ” Warning mark – Any information in this manual with a warning mark must be 

abided by strictly, otherwise there will be danger of the personal safety or could lead to a 

significant accident. 

“ ” Forbidden mark – Any information in this manual with a forbidden mark must be 

abided by strictly, otherwise there will be danger of the personal safety or could lead to 

damage of the machine. 

1.1

 

Warning 

 Do use 220v AC power and the provided cable and plug. Please make sure the power 

match the machine in the play court. 

 Do not disassemble or change the machine voluntarily, otherwise it will damage the 

machine or cause serious accidents. 

 Do not use the machine close to volatile or flammable gas. 

 Do keep away from heat, prevent putting the machine under the sun for long time 

avoiding the plastic and rubber parts become aged. 

 Do contact with local service provider or manufacturer. If the machine has an unusual 

situation, for example: big noise, strong smog and leakage, please cut the power 

immediately. 

 Do unplug the power plus when the machine is not in use or renew parts. 

1.2

 

Forbidden 

 Do not let the kids play with the machine or power equipment. 

 Do not touch the inner parts when the machine is operating or it will cause an accident. 

 Do not let the kids operate the machine when cleaning up interior of the machine, in 

order to avoid damaging the machine or causing any danger. 

 Do not operate the power or machine switch with barefoot or wet hands. 

 Do not move it during working. 

 Do not clean the surface of the machine with volatile wet cloth. 

 Do not putting it aside in moist or other bad environment. 

 Do not pressing the ascending and descending pounds function in the same time, 

otherwise it will cause damage to the machine. 

 Do not placing the cable in high temperature or beside the heating. 

Summary of Contents for Electronic SX-01












Reviews: