Prorack PR3501 Installation Instructions Download Page 1

Page: 1 / 4

Number Plate Holder

Item # Component

Qty

Back Plate

Knurled Nuts

Screws

Velcro Straps

Insert Velcro Straps

Take x2 Velcro Straps and thread through
the front of Number Plate Holder as shown.

Pull Velcro Straps completely through as shown.

Note:

Number Plate Holder
can also be attached to
other carriers using the
other slot combinations.

First Time Installation

•

Please read instructions carefully before installation.

•

Check the contents of kit. Contact your Prorack dealer if
any parts appear to be missing or damaged.

•

Place these instruction in the vehicle’s glove box after
installation is complete.

Kit Contents

6100010205-Rev1

Summary of Contents for PR3501

Page 1: ...ompletely through as shown Note Number Plate Holder can also be attached to other carriers using the other slot combinations First Time Installation Please read instructions carefully before installat...

Page 2: ...ded through one of the lower slots in Number Plate Holder to prevent swinging if you opt to attach Number Plate Holder to the rearmost bicycle on the carrier 4 Prorack 17 Hinkler Court Brendale QLD 45...

Page 3: ...094 RACK B I K E R A C K N U M B E R P L A T E 6100010205 Rev1...

Page 4: ...through slots in your number plate with the appropriate holes in Number Plate Holder Secure Number Plate Turn Number Plate Holder over carefully ensuring that the screws don t fall out Spin the Knurle...