Page
1
of
4
K422 ASSEMBLY AND FITTING
INSTRUCTIONS
Kit Contains
1 x Instructions
4 x Feet Assemblies
4 x Coach Bolts
4 x M6 x 12 mm Capscrews
8 x M5 x 12 mm Capscrews
Remove parts from box & check
Contact your Prorack dealer if any parts are missing or damaged
Items you will require that are not included:
1 x Tape measure
1 x Step Ladder for higher vehicles
Important Note:
Whispbar Through Bar pictured in these instructions, also applicable for Whispbar Flush Bar
Whispbar Through Bar pictured in these instructions, also applicable for Whispbar Flush Bar
Whispbar Through Bar pictured in these instructions, also applicable for Whispbar Flush Bar
Whispbar Through Bar pictured in these instructions, also applicable for Whispbar Flush Bar
When Fitted and loaded
correctly
75
75
75
75
kg
kg
kg
kg
Maximum
Whispbar
Load
Rating
1. Fitting Feet Assemblies to Legs
•
Remove crossbar and this kit parts from the
packaging.
•
Follow step 1-3 of crossbar assembly instructions.
•
Remove clamp block by pressing it backwards.
•
Remove both pins from each leg.
(use
spanner/screwdriver located inside one of the left
hand covers to assist)
Press Here
Remove both pins
1.1
1.2
4 x Clamps
4 x Red Plastic Knobs
