3
1
Introduction
The EVBlpc213x board was created with the aim of providing a hardware base for a designer of
systems relying on the MMlpc213x minimodule, allowing to realize and verify quickly one’s own
ideas. Having this in mind, the board has been designed in such a way that the user has access
to all terminals of the module which are led out to connectors. The board houses also such
peripherals as: LEDs, push-buttons, potentiometers, a LCD display, a RS232 interfaces, and a 1-
Wire connector. All these elements are accessible through pin connectors, permitting their
connection with any processor port. The board has also a large prototype area which permits the
designer to connect other elements in any configuration. Due to the incision (v-cut) between the
prototype area and the rest of the board, the prototype part can be broken off. The board contains
also a power supply which relieves the user from the need to provide a regulated supply voltage.
Together with the board, we deliver GCC compiler as well as demonstration software.
The EVBlpc213x along with the MMlpc213x minimodule can be also used in didactic laboratories
of informatics colleges and universities. It can be also used to build circuits realizing thesis
projects.
We wish you nothing but success and a lot of satisfaction in designing and
developing new electronic equipment based on the EVBlpc213x board and
the MMlpc213x minimodule.
Features
•
Socket for the MMlpc213x module
•
Connector with all terminals of the MMlpc213x module
•
Connectors of all peripherals accessible on board
•
Power supply
•
Power switch
•
Two RS232 ports
•
1-Wire connector
•
JTAG connector for in system programming and debugging
•
connector for 2x16 LCD display
•
8 LED diodes
•
4 push-buttons
•
2 potentiometers
•
Buzzer
•
Prototype design area
