Detachable
7
8
9
10
10
4
3
1. LED Light Indicator
Volume – (Volume down/FM Radio track back )
2. (Volume up/FM Radio track forward )
3. MFB (Multi-functional Button )
4. Control Button ( Power/Pairing/Intercom )
Headset & Charging Jack
Microphone
Audio USB Connector
Audio Connector
Speakers
1
2
3
4
5
6
7
8
9
10
2
1
3
4
5
6
1. Mouthing the Clip
The headset clip must be mounted onto the helmet. Once mounted, the
headset unit can be attached or detached from the headset clip at any
time. Even remove it for charging and storage.
Note: We recommend that you remove the headset from the helmet when not in use.
2. Mounting the Microphone and Speakers
2.1 The Microphone must be positioned in front of the center of the mouth.
2.2 Attach the speakers to the Velcro inside your helmet opposite your ears
(short speaker cord for left ear & long speaker cord for right ear), or use
the supplied Velcro pads.
2.3 For some countries’ traffic regulations, only one speaker is permitted to
install in the helmet. In this case, the right side speaker can be detached
and then leave only one speaker for better keep your mind on the road
condition.
Note: Always prioritize your riding, not Mobile phone calls, or whilst using the interphone, deceleration
and concentrate on your riding. In bad weather and/or heavy traffic, we recommend pulling over and
stopping, before answering.
Installation
Microphone
Speacker
