6
INDEX
INDEX
INTRODUCTION
SAFETY INSTRUCTIONS
ASSEMBLY
OPERATING
MAINTENANCE
DRAWING OF MOTORCYCLE MOVER
2
2
2
3
3
3
10
INHOUD, INTRODUCTION, SAFETY, ASSEMBLY
INTRODUCTION
Please read these instructions carefully. Note the safety instructions and warnings. Use the product
correctly and with care for the purpose for which is intended. Failure to do so may cause damage to
property and/or personal injury. Please keep this instruction manual safe for future use.
The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator.
SAFETY INSTRUCTIONS
ASSEMBLY
Warning
Use a qualified person to maintain the dolly in good condition. Keep it clean for best and safest
performance.
The maximum load is 1250 lbs. Do NOT exceed this rated capacity.
Use this dolly for carrying motorcycle purpose only. DO NOT use it for any other purpose it is not designed
to perform.
Do not use the dolly in carrying or moving person, and DO NOT sit on the dolly.
Keep children and unauthorized persons away from the work area.
Remove loose clothing. Remove ties, watches, rings and other loose jewelry, and contain long hair.
Wear ANSI approved safety goggles when operating the dolly.
Keep proper balance and footing, do not overreach and wear nonskid footwear.
Only use the dolly on a surface that is stable, level, dry and not slippery, and capable of sustaining the load.
Put the handles on Carriage A and Carriage B down when not in use., lock it in a safe, dry place and keep it
away from children.
Always keep your hands and feet away from moving parts.
DO NOT operate the dolly when you are tired or under the influence of alcohol, drugs or any intoxicating
medication.
DO NOT make any modifications to the dolly.
DO NOT expose the table to rain or snow.
If the dolly needs repairing and/or there is any part which needs to be replaced, have is repaired by
authorized technicians and only use the replacement parts supplied by the manufacturer.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
Unpack the table and check contents with list below. Should there be any damaged or missing parts,
contact your supplier immediately.
Content:
Caster Ass’y
Frame Ass’y
Step pin
Connecting plate
Connecting pipe
Side tray
Carriage A, Carriage B
Bolt
Nut
Washer
Lock washer
2 -
