LCD DISPLAY FUNCTIONS AND SETTINGS:
●
PRESS
THE “
ON/OFF
” BUTTON ONCE TO SWITCH BETWEEN TRIP METER AND ODOMETER.
●
PRESS/HOLD
THE “
ON/OFF
” AND “
+
“ BUTTON TO ACTIVATE THE
DISPLAY BACKLIGHT
.
●
PRESS/HOLD
THE “
–
“ BUTTON TO ACTIVATE THE
WALK MODE
. THIS WILL GENTLY ENGAGE
THE MOTOR AND GENTLY PUSH THE BIKE FORWARD AT A LOW SPEED OF 3 MPH. THIS
FEATURE IS USEFUL WHEN WALKING YOUR BIKE UP A VERY STEEP HILL.
●
PRESS/HOLD
THE “
–
” AND “
+
“ BUTTON TO ENTER THE
SETTINGS
.
PRESS
THE “
ON/OFF
”
BUTTON ONCE TO SWITCH BETWEEN SETTING OPTIONS. YOU CAN ADJUST THE CLOCK,
DISPLAY BACKLIGHT BRIGHTNESS LEVEL, AND THE DISTANCE UNIT (MPH VS. KM/H).
PRESS/HOLD
THE “
ON/OFF
” BUTTON TO EXIT OUT OF SETTINGS.
1. PLUG THE BATTERY CHARGER UNIT INTO A STANDARD WALL OUTLET AND CONNECT THE
CABLE TO THE BATTERY. [SEE ILLUSTRATION BELOW]
NOTE: YOU CAN CHARGE YOUR BATTERY ON OR OFF THE BIKE.
A
RED LED
LIGHT ON THE CHARGER INDICATES THAT
CHARGING
IS IN PROGRESS.
2.
A FULLY DRAINED BATTERY TAKES ABOUT
2.5-3 HOURS
TO RECHARGE. A
GREEN LED
LIGHT
ON THE CHARGER WILL ILLUMINATE ONCE THE BATTERY IS
FULLY CHARGED
. YOU CAN CHECK
THE BATTERY LEVEL BY TAPPING ON THE ROUND BUTTON ON TOP OF THE BATTERY.
3.
SAFETY TIP
: UNPLUG THE CHARGER ONCE THE BATTERY IS FULLY CHARGED.
WARNING:
DO NOT USE UNAUTHORIZED CHARGERS TO RECHARGE THE BATTERY.
USE THE PROPELLA CHARGER ONLY.
4
