The PROPEL Torch, Collet Assembly and Brush must be kept clean to provide
trouble-free service. Regular cleaning of the PROPEL Torch will prolong the
service life of the components.
1. At the end of use, remove the Brush and the Shroud as previously described
and rinse with clean water. Rinse the Collet Assembly and any part of the
PROPEL Torch which may have cleaning fluid residue on it after use.
2. After rinsing components with clean water, spray with neutralising fluid
(see
below for compatible neutralizing fluids)
and re-rinse.
• Neutralise with TB-42 if using TB-25 & TB-21ND weld cleaning fluid
• Neutralise with TB-41 if using TB30ND weld cleaning fluid
3. Allow to dry before reassembling.
Important!
If residue from weld cleaning fluids remains on the Brush, Brush
base or Collet, corrosion will form and seize the threads. Corrosion will reduce
the PROPEL Torch performance and increase wear of components.
PROPEL Torch Care
6
Summary of Contents for K-PROPL-CSPck-0001
Page 1: ...INSTRUCTION MANUAL HIGH PERFORMANCE CLEANING...
Page 11: ...Notes 11...
