manualshive.com logo in svg

Proolin VoIP Tech CS-830, User Manual

Share
Download
Proolin VoIP Tech CS-830 User Manual Download Page 10

                                                                                      VoIP  Phone  User

’

s  Manual

 

 

This page and its sub-pages are available on device that supports bridging and allows 

viewing and configuration of the WAN interface status/settings. The default WAN interface 

IP address is set to 192.168.0.200.Please note that any actions/modifications which alter 

the  topology  of  the  Ethernet  Bridge  will  result  in  the  spanning  tree  protocol  to  relearn. 

During this relearn period (may take up to one minute), HTTP access will be unavailable 

on all bridged interfaces (including the PC interface).

   

9.3 SIP Configuration   

 

This page allows configuration of the SIP server and endpoint settings.   

Enter  the  address  and  port  value  of  the  SIP  server.  The  address  may  be  an  IP 

address  or  the  name  of  the  server.  If  no  SIP  server  address  is  entered,  the  device  will 

Summary of Contents for CS-830


























Reviews:

No comments

Brands by name

Popular brands

Load more brands