Pronomic PDI-10 DI-Box passive Article no.: 00034464
Features
With PDI-10 direct-injection-box, you can directly take a sound signal from a
highly resistant, unbalanced cable, e.g. between guitar and amplifier, and send it
directly to the mixer input. It converts unbalanced instrument-inputs into balanced
600-Ohms-mixer-inputs. Ground-lift switch to avoid noise loops. Input level can be
adjusted by using attenuation switch ATT (0dB/20dB/40dB)
Precautions
1) Read these instructions before operating the unit.
2) Please heed all safety warnings and keep these instructions for future
reference. Follow all instructions.
3) Do not use this device near water or moisture.
4) Clean only with dry cloth.
5) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus that produce heat.
6) Only use attachments/accessories specified by the manufacturer.
7) Do not open the device
8) For best results use only high quality audio cables and connectors
9) Refer all servicing to qualified service personnel. Servicing is required
when the device has been damaged in any way, such as liquid has been
spilled or objects have fallen into the device, the DI-Box has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Specifications
Pronomic PD!-10: DI-Box passive
Frequency Range: 15Hz … 30kHz
Input Impedance: 50k
Ω
Output Impedance: 600
Ω
balanced output
Connectors:
6.35mm Input jack, 6.35mm output jack (para through),
XLR male balanced input/output jack
Ground lift:
ground lift ON/OFF
Input level adapt: 0dB – 20dB – 40dB
Dimensions:
76 (W) x 130 (L) x 38/45 (H) mm
Weight:
650 g
1. INPUT jack
6.35mm input jack to connect musical instruments (guitar, bass, keyboard) or
microphones.
2. OUTPUT jack
Connect this jack to your amplifier or some other electric or electronic musical
instrument, or another effects unit.
3. Input level switch ATT (attenuation)
Adapt input sensitivity. For high level signals e.g. keyboard output use 20dB or
40dB attenuation, low level input signals use 0dB.
4. XLR OUTPUT jack
600
Ω
balanced output to connect to mixer or
Amplifier input.
5. Ground Lift switch
If there is noise (due to ground loops) use this
switch and set off ground connection.
Musikhaus Kirstein GmbH
Bernbeurenerstr. 11 / 86956 Schongau / Germany
Phone: 0049-8861-909494-0 Telefax: 0049-8861-909494-19
