Pronomic OYK800-BT Bluetooth Headset
To avoid deformation, discoloration, or other
serious damage, do not expose this unit to
the following conditions:
•
Direct sunlight
•
Heat sources
•
Magnetic fields
•
Extreme temperature or humidity
•
Excessive dusty or dirty location
•
High humidity or moisture
•
Strong vibration or shock
Cleaning:
Clean only with a soft, dry cloth. If necessary,
slightly moisten the cloth. Do not use abrasive
cleanser, cleaning alcohol, paint thinners,
wax, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
Handling:
Do not apply excessive force to the switches
or controls. Take care not to drop the unit,
and do not subject it to shock or excessive
pressure.
S1: Answer call / Reject call / Redial / End call
S2: Previous song / Volume (-)
S3: Power ON/OFF / Bluetooth mode (long
press for 5 seconds) / Play / Pause / Micro-
phone switching between mobile phone and
headset
S4: Next song / Volume (+)
LED: LED indicator
MIC: Microphone
USB: Mini USB charging socket
The headset is equipped with a built-in lithium
battery. Please fully charge the battery by
using the USB cable for at least 4 hours for
the first time of use. After that the battery
charging will take approximately 2~3 hours.
The LED indicator will be lit in red while
charging and will go off after the charging is
completed.
Attention:
When the battery power is draining, there will
be two reminder beep sounds and the LED
indicator will flash twice in red. When the
battery power is drained, the headset will
switch off automatically.
If the headset has already been paired with
the mobile phone or the Bluetooth device
before, and the headset pairing name
“OYK-
101A”
is still on the available pairing list of
your Bluetooth device, press the S3 button for
3 seconds to switch on the headset. When
the headset is switched on, there will be a
beep sound and the LED indicator will slow
flash in red. To power off the headset, press
the S3 button for 3 seconds. There will be a
beep sound when the headset is powered off.
For first time pairing long press the S3 button,
the LED indicator will step through this
sequence: 1 sec. blue light, 2 times red
(short), fast flashes in red/blue which
represents that the headset is ready for
Bluetooth pairing.
Activate the Bluetooth on the mobile phone or
the Bluetooth device and the pairing name of
the headset
“OYK-101A”
will be found on the
available pairing list.
Click on
“OYK-101A”
to start the pairing. If
passwords are required, they are “0000”.
After the headset is paired with the mobile
phone or the Bluetooth device, there will be
two beep sounds and the LED indicator will
slow flash in blue.
Attention:
If the pairing has not been successfully done
within three minutes, the headset will auto-
matically shut off.
If the headset is not in the pairing mode, the
headset will not be connected with the mobile
phone or the Bluetooth device. Please set
your headset at the Bluetooth pairing mode.
When the headset and the mobile phone
have been successfully paired, you can
take/make calls via the headset.
Make call
Dial the phone number via your mobile
phone. There will be a beep sound and the
call will automatically be switched to the
headset (you may have to do the switching
manually on some mobile phone models).
Redial phone number. To redial the phone
number, press the S1 button.
Answer/Rejecting call
There will be a notice beep sound when a call
comes in. Press the S1 button to answer the
call. During the call, you can press the S3
button to transfer the call back to the mobile
phone. Press the S3 button again will transfer
the call to the headset (some mobile phone
models may not support this function). If you
would like to reject the coming call, press the
S1 button for about 1 second or reject it via
the mobile phone.
End call
If you would like to end the call, press S1
button once or end it via the mobile phone.
Adjust sound volume
During the call, long press
the S2 button to
decrease the sound volume or press the S4
button to increase the sound volume.
The mobile phone or the Bluetooth device
should support Bluetooth HFP, HSP, AD2P,
ACVRP and A2DP profile.
To go to the next song, press the S4 button
once. To go to the pervious song, press the
S2 button once. To play or pause the music,
press the S3 button once.
Long press the S2 button to decrease the
sound volume or long press the S4 button to
increase the sound volume.
Using unoriginal accessories may cause
performance degradation, personal injury, an
electrical short circuit and warranty failure.
Do not open: Disassemble the headset can
damage the item and void your warranty.
Keep children away from the headset.
Avoid using the headset in high temperatures.
Please store or use the headset in the
temperature range of 10
°
C to 45
°
C.
The battery performance will decrease be-
yond the temperature range of 10
°
C to 45
°
C.
If the headset is not to be in use for a long
time, please charge the battery at least once
every two months.
Bluetooth version: V2.1+EDR
Support device: Bluetooth device which supports
HFP,HSP,A2DP,AVRCP Bluetooth
Operation frequency range:
2.402GHZ~2.480GHZ ISM Band
Frequency response: 20HZ-20KHZ
Receiving range: up to 10m
SNR:
≥
75dB
Audio output power max.: 2*10mW
Standby time:
≥
185 hours
（
with battery fully charged
）
Operating time: 6 hours
（
with battery fully charged
）
Battery: built-in polymer lithium ion battery
USB cable for charging
Dimensions: 180*140*32mm
Weight: 100g
Musikhaus Kirstein GmbH
Bernbeurener Strasse 11
D-86956 Schongau
Germany
Phone: 0049-8861-909494-0
Fax: 0049-8861-909494-19
Precautions
Operation
Battery charging
Power On/Off
Bluetooth Pairing
Telephone calls
Playing music
Maintenance
Specifications
