Read these instructions carefully before using the product
1. When the speakers are installed in walls, check that the wall structure is reliable and that the
speaker is firmly attached. The user should be responsible for this very thing.
2. Do not install the speakers in fine wood or soft wall material because the screws can get loose,
causing the crash or breakdown of the speakers and personal injury.
3. Don not use nails, adhesives or other unauthorized devices. Long-term use and vibrations may
cause it to fall easily.
4. Do not place the speakers on a turntable or movable support.
5. Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
6. Do not listen to sound at a very high level when you are changing the input source (for example, to
tune FM / CD) Installation or removal of cables should make sure that the power amp / amplifier
device radio is turned off.
7. Do not attempt to clean the speakers with chemical solvents as this may damage the paint surface.
Clean with a dry cloth.
Users have a responsibility to place or install safety.
The speakers that are placed in the holder can be either wall or ceiling type, using screws to be placed
inside of the speakers in the back is optional.
1. Mark the mounting bracket as a template with the regional location of the hole slots.
2. Then use the appropriate hardware and tools (not supplied) are properly fixed to the bracket
wall/ceiling
3. Place the speakers to the bracket using the screws and washers according to the speaker.
Connection
Use wire on the back of the speaker in the output tab of the amplifier (or amplifiers of radio). The speaker
wire is on one side red and on the other one black. Connect to he red side of the amplifier and speakers
(+) tab. Connect one end of the black side (-) in the other tab. Connect each speaker to make sure that is
not (+,-) inverted polarity. If the polarity of the speakers is reversed, the sound will be unnatural and will
play without bass.
User Manual English
Safety Instructions
