Pronomic Lift&Drive 90IE, Original Instructions Manual

Page: 8 / 16

________________________________________________________________________________
8 – Lift trolley Lift&Drive 70IE / 90IE / 90JE
The remote control should be placed to allow the user to easily press the buttons or to control the
lever. The bracket for the remote control is fitted to the handlebar. The bracket can easily be
moved by turning the black knob counter-clockwise. The bracket can be locked in any position on
the handle by turning the knob clockwise. The bracket can be tilted to any angle on the handlebar.
The remote control can be removed from the bracket.
3.3 Power pack
Modifying the power pack is dangerous. The device may not be sealed in any way. It should not be
exposed to splashed or running water.
3.4 Brakes
On lift trolleys equipped with central brake the brake is applied by moving the brake bar to its
lowest position.
On lift trolleys with individually braked wheels the brakes are applied by pressing down the lever
on each wheel separately.
3.5 Directional lock
On lift trolleys equipped with central brake the directional lock is activated by moving the brake
bar to its highest position. This locks the rear wheels in a position that only allows the lift trolley to
move straight forward or backward
4 Safety
Use the protective equipment (e.g. protective footwear) required to handle the goods.
The stated maximum load may not be exceeded.
The lift trolley must not be used for lifting people.
Note the crush hazard between the load carrier and the wheel frame or floor when raising and
lowering the load carrier. Do not keep hands or other body parts under the load.
4.1 Storage and transport
During storage and transport the remote control and motor cable should be disconnected.
The lift trolley should be secured during transport to avoid the risk of tipping over.
4.2 Movement
The load carrier should always be lowered as low as possible to ensure safe and stable handling.
Be extra cautious when passing thresholds, cords and other objects on the floor.
The movement of heavy loads can be easier when using the directional lock.