________________________________________________________________________________
12
–
Lift trolley Lift&Drive
70IE / 90IE / 90JE
5.3
Trouble shooting
The lift trolley is designed for safe and efficient operation, provided that routine maintenance is
carried out in accordance with the instructions given. If problems arise, some guidance is provided
below. If the problem persists after action has been taken
–
Please contact service technician or
Pronomic.
If the load carrier does not move at all, or very slowly:
•
Verify that the maximum load is not exceeded.
•
Charge the batteries.
•
Check that the battery charger works. A light should be visible on the charger when plugged
into the mains power.
•
Check if the fuse inside the power pack needs to be replaced.
•
Check the battery voltage and replace batteries if the voltage after 8 hours of charging is
less than 25 volts.
If the lift trolley sounds strange:
•
Make sure the lift trolley is correctly assembled, see section
Assembly
.
•
See section
Maintenance
.
6
Technical specifications
Model
70IE
90IE
115IE
90JE
115JE
Maximum load
70 kg *
90 kg
115 kg
90 kg
115 kg
Batteries
Vented lead batteries
Nominal battery voltage
24 V DC
Mains voltage
230 V AC 50 Hz or 115 V AC 60 Hz
Noise
The noise level does not exceed 70 dB(A)
Vibration
Vibrations do not exceed 2.5 m/s
2
Test factor for static testing
1.25
* If the load exceeds 40 kg the load carrier will descend slowly.
