10
Front panel
1) MIC INPUTS (1)
Connect your microphones to these sockets
2) MIC 1 LEVEL CONTROL (2)
A correct setting of the controls for MIC 1 input GAIN is crucial for getting a good,
strong signal without noise or distortion
3) MIC 2 LEVEL CONTROL (3)
A correct setting of the controls for MIC 2 input GAIN is crucial for getting a good,
strong signal without noise or distortion
4) MIC TREBLE TONE CONTROL (4)
This knob adjusts the treble of MIC 1 and MIC 2
5)
MIC BASS TONE CONTROL (5)
This knob adjusts the bass of MIC 1 and MIC 2
6)
CUE SELECTION for MIC 1 and MIC 2 (6)
Use the Cue Selection to monitor the selected MIC1-2 input source
7)
TALK OVER SELECTION for MIC (7)
This switch has three positions. In OFF position, mic 1 and 2 are disabled. In
On position, mic 1 and 2 inputs are enabled. In talkover, the main signal is
automatically reduced to listen the person who talk on mics connected in mic 1
and 2 inputs