INTRODUCTION
Water Resistant Day / Night Infra Red Colour Camera
CONNECTIONS
The IM-ERC-02 General Purpose Water Resistant Camera adopts the latest SONY
technology, CCD Sensor and driver.
Key features of the ERC-02 are itʼs attractive, stylish housing, environmental protection
(IP68), ease of installation and setup and high resolution.
Built-in Infra Red LEDʼs operate automatically in low light to provide visability in com-
plete darkness.
The IM-ERC-02 is perfect for use as an engine room camera, a back-up or docking
camera, or part of an on board security system.
Please ensure installation is carried out by qualified engineer and that the device is
properly connected to the power source. This equipment must be suitably isolated to
prevent damage or risk of injury. For further technical support please contact your
dealer, or Iris Innovations using the contact details within this document.
The ERC-02 camera is fitted with a cable tail which has a 2.1mm DC Jack for the
power and a female BNC connector for the video signal. The polarity of the power con-
nection is center pin = +12V, connector body = Ground.
Use a suitable coaxial cable with an impedance of 75Ω for the video signal or a suit-
able Video Balum if using Cat 5 cable.
Ready made power, video and combination cables are available from Iris Innovations.
Reverse Image Version
ERC-02 cameras with reverse (or mirror image) functionality have a DIP switch fitted to
the inside of the housing. To select the reverse image feature simply slip off the sun
visor and unscrew the front of the camera housing.
Set switch 1 to ON for reverse image. Set switch 1 to OFF for standard image.
Video (1v P~P Composite 75Ω)
12VDC 300mA
Connect to boatʼs distri-
bution panel and ensure
suitable isolation is in
place.
Summary of Contents for IM-ERC-02 Series
Page 1: ...IM ERC 02 USER GUIDE...
