PRONAR T679/3, Operator'S Manual, Page: 110 / 117

PRONAR T679/3 PRONAR T679/4 SECTION 5
5.36
Tighten the bolts (5) using the correct torque according to table (5.7).
The design of the drawbar (1), and the faceplate (2) allows the three
settings (I) (II) (III).
Set and mount the rotating drawbar eye (3), or fixed drawbar eye (4) in the
appropriate position.
The design of drawbar (1) allows two settings of the drawbar hitching
eye.
5.11 ADJUSTMENT OF TAILGATE POSITION
FIGURE 5.17 Adjustment of tailgate position
(1) hydraulic tailgate, (2) pressure adjustment, (3) adjustment nut, (4) nut, (5) slide
The tailgate position should be checked during trailer operation. If the tailgate position is
incorrect, a gap will occur between the side edge of the tailgate and the rear surface of the
load box. If both surfaces do not adhere precisely to each other, the load box is not tight and