PRONAR T663/1, Operator'S Manual

Page: 52 / 135

Pronar T663/1 T663/1 SILO SECTION 3
3.8
(6) for the trailer spare wheel can be installed on the front wall. Wheel mounting is possible
only after the fenced platform (4) is disassembled.
Springs (7), fenced platform (4) and holder with a spare wheel are available as additional
equipment.
FIGURE 3.4 Load box – front view
(1) side wall locking lever, (2) lower ladder, (3) wall extension ladder, (4) fenced platform,
(5) tarpaulin cover, (6) spare wheel holder, (7) draw back springs
In order to enable very precise unloading of loose materials there is a slide gate (1) in the
rear wall (1) – figure (3.5), which is raised using lever (2). When in upper position and also
during transport the slide gate must be secured by tightening the locking screw (3). A chute
for the trailer, secured under the lower edge of the chute opening slide gate can be supplied
as additional equipment.