PRONAR T285/1, Operator'S Manual, Page: 99 / 136

SECTION 5 Pronar T285/1
5.9
In case of mechanical damage consult the nearest tyre service and check whether the tyre
defect requires tyre replacement.
Wheels should be inspected with regard to distortion, breaking of material, breaking of welds,
corrosion, especially in the area of welds and contact with tyre.
Proper technical condition and appropriate maintenance of wheels significantly extends the
life of these components and ensures appropriate level of safety to trailer users.
Checking tyre pressure and steel rims:
•
every 1 month of use,
•
every week during intensive work,
•
after changing spare wheel.
5.2.6 CHECKING THICKNESS OF BRAKE SHOE LININGS
During use of trailer, friction lining of brake drums is subject to wear. In such a case, the
complete brake shoes should be replaced with new ones. Excessive wear of brake shoes is
the condition in which the thickness of linings which are glued or riveted to steel structures of
brake shoes is smaller than the minimum value. This condition is indicated by extended
cylinder piston stroke. Check technical condition of brake shoe linings through inspection
openings (3) – figure (5.3).
TIP
Minimum thickness of brake shoe linings is 5 mm.
•
Thickness of brake shoe linings should be checked every 6 months.