6
BASIC OPERATIONS
The first time installation
Connect to power source and turn on the screen, the below installation menu page will display on the screen.
Select the desired menu language. Press
START
to go to the next page.
Select location and press
NEXT
to finish the
installation.
Turning the screen on or off
1.
Plug the power cord into an AC power outlet.
2.
Switch the Power Switch on the screen on.
3.
Now the screen is in standby mode. Wait a moment until the power indicator lights up, then press
button to turn on the
screen.
Note:
Be sure to wait for a few seconds before pressing
button. If you promptly press
button then the screen may
not respond or act wrongly.
4.
Press
button for about 2 seconds to put the screen in standby mode.
5.
Switch the Power Switch off to cut off the power completely.
Note:
If the VGA does not get any signal it will go into stand-by after two minutes, while others source does not get any
signal it will go into stand-by mode after 10 minutes.
