P.6
Important:
1. Switching Off
a) For protection of the transmitter and power saving, the transmitter will
switches off automatically if there is no audio source signal for 3 minutes.
If the audio source signal returns, the transmitter will automatically
switches back on. Then, power on the headphone again.
b) The headphone will switch off automatically if there is no signal from the
transmitter for 2 minutes.
2. Make sure the headphone is turned off when charging is in process.
3. Only use the included rechargeable AAA batteries. When the headphone is not
in use, turn OFF the power to avoid damaging the batteries.
4. To ensure a long service life, fully charge the batteries before
using the
headphone for the first time. The initial charge takes 12 hours to complete.
Ensure the charging socket located on the right earphone connects securely
with the charge prongs on the transmitter cradle.
TROUBLE SHOOTING
NO SOUND
-
Ensure the AC/DC adapter is fully inserted into the AC outlet and the
power connection input on the transmitter.
-
Ensure the headphone is switch ON.
-
Headphone battery charge level may be too low, recharge the batteries
fully.
-
Ensure the TV or the connected audio device is switched ON.
-
The volume of headphone may be too low, adjust the volume to a
moderate level.
DISTORTION
-
Ensure the volume level of headphone is set to an approximate level.
-
The headphone is too far from the transmitter, move it closer.
-
The audio signal input level is too low. Increase the volume of the audio
source.
