Promise Atlas S8+, User'S Product Manual

Page: 29 / 29

22
Promise Technology Atlas S8+
LAN Port LED 1G 100M 10M
No connection
Activity
Amber Amber Amber Off
Link
Amber Green Off Off
Number Description Definition
1
USB One
Touch Copy
Button/ USB
Status LED
USB Copy Button
• Press the button one time to start the action defined through UI (Note: USB one touch
copy function needs to be enabled through UI first)
USB Status LED
• Blue : A front USB device is detected (after the device is mounted).
• Blue flashes every 0.5 sec: 1) A USB device (connected to the front USB port) is being
accessed. 2) The data is being copied to or from an external USB device.
2
Solid State
Drive (SSD)
LED
•
Blue
: The hard disk is attached.
• Blue flashes: The disk data is being accessed.
•
Amber
: A hard drive read/write error occurs.
• Blue and Amber flashes alternatively: The hard disk is being rebuilt or identify a
specific disk drive.
• OFF: No disk drive is inserted.
3
Power
Button/LED
Power Button
• Press the button one time to turn ON or OFF the system power.
• Keep pressing for 4 seconds to force turn OFF the system power.
• Power LED
• White : power is ON.
• White flashes every 0.5 sec: the system is at the stage of starting up or shutting down,
or the NAS is not configured.
• Amber : 1) The system pool has reached its full capacity (100%). 2) The system pool
is going to be full (95%). 3) The system fan is not functioning properly. 4) A bad sector
is detected on the hard disk drive or hard disk failed. 5) One of the pools is in degraded
read-only mode. 6) Hardware self-test error. e.g. abnormal voltage, the temperature is at
critical high/low, any cooling fan module failed, any pool failed.
• White and Amber flash every 0.5 sec alternatively: 1) The system firmware is being
updated. 2) RAID rebuilding is in a process. 3) Software control LED indicator.
• Off: the system shutdown.
4
LAN Status
LED
• Blue : The NAS is connected to the network.
• Blue flashes: The disk data is being accessed from the network.
5
Disk Drive
Status LED
• Blue : The hard disk is attached.
• Blue flashes: The disk data is being accessed.
•
Amber
: A hard drive read/write error occurs.
• Blue and Amber flashes alternatively: The hard disk is being rebuilt or to identify a
specific disk drive.
• OFF: No disk drive is inserted.
6
Activity
Link
Activity
Link
Activity
Link
Link
Activity