Back of VTrak D5800 and D5600
The rear of the VTrak D5000 Series enclosure provides access to the power supply units, which include the
cooling fans, and the system controller(s).
Each controller has two RJ-45 Gigabit Ethernet ports used for management, an RS-232 serial management
port using an RJ-11 connector, two 10 Gb/s iSCSI ports (SFP+ ports), two SAS Expansion ports for additional
drive enclosures, and various LED indicators which are described below. In some markets, a special release of
the VTrak D5000 controller includes four Fibre Channel data ports per controller using standard SFP sockets. The
controllers pictured in this section display the Fibre Channel version.
VTrak D5320 front view
VTrak D5300 front view
Back view of VTrak D5800
Power Socket
PSU 2
ON/Off switch
Power Socket
PSU 1
ON/Off switch
Data Cache module
(requires four SSD drives)
Controller 1
Controller 2
9
Promise
Technology
Introduction
